Q. My pool pump is humming and won’t start.
A. This usually indicates a problem with the motor of something jamming the impellor. With the power off, remove the pump basket, reach into the opening towards the back of the pump and feel for debris. Remove if any. If the problem persists, call your pool technician.
My pool is making a gurgling sound, what is wrong?
The water level is too low. It should be at least half way up the skimmer box opening, with about a 2 cm (1″) gap at the top.
Don’t forget to bleed the air out of the filter!
There is water leaking from under my pump motor. What is wrong?
The mechanical seal needs replacing. It is important to have this simple repair done as soon as possible, or further more expensive damage will be done.
My pump is squealing and or whining ?
This is usually an indication that the bearings are worn out and need to be replaced. Turn the pump off.
Either remove the pump and take it to a small engine / motor repair shop or contact a pool company to have it serviced.
How do I keep my water clear in the meantime ?
It is always a good idea to have a quality brand of chlorine pucks on hand no matter what type of sanitizing system you use. In the event of pump failure or chlorine generator failure we recommend that you do either or both of the following: