Affordable Pool Repair Services in Waterloo

It can be very important to use only reliable pool repair services in Waterloo and one of the best companies to deal with is Pro Pool & Spa Ltd. If you are a property owner and you have a nice pool on your property, you surely know that pools require a repairs and maintenance from time to time. The reason for which you have installed a pool is that you surely want to have fun with your friends and family, but also to relax after a hard day at work.

Usually, people look for information about pool repair services in Waterloo by asking friends, neighbors, relatives, co-workers, or by searching online. These sources are all good, but people should also verify if the company they found has experience, it is licensed and can provide reliable services. Pro Pool & Spa Ltd. meets all these conditions and even more. Beside repairs, you can also benefit from services of pool design, installation, maintenance and others.

Many pool owners may not be aware of the fact that swimming in a pool can be almost as dangerous as swimming in an ocean, sea or river if the pool is not in a good condition. For this reason, it is important for a company to have the right permits, staff and equipment. In order to have a summer without worries and swim everyday with your family and friends, you must keep your pool in the best condition.

The first thing to do this is to check the water clarity regularly. If you notice that the water is not crystal clear anymore, then your pool may require cleaning.

If you do not want to be exposed to different types of microbes and get rashes or diseases, you should clean your pool regularly. If cleaning doesn’t help, then something may be damaged in the pool and you may have to use pool repair services in Waterloo like the ones provided by Pro Pool & Spa Ltd. The filtration system should always be kept in the best condition, as this can prevent future problems.

Pools can resist to wear and tear for prolonged periods of time. If you see that the color and the clarity of the water are not as they should be, the best thing to do is to let professionals from the company to fix the filtration system, as it is surely the problem.

Other things that can cause problems are the tiles and the deck lights. For example, the tiles can be cracked from time to time (usually every season). If you let professionals fix the cracks when they are smaller, you can avoid later complications.

Details like this one may seem insignificant, but they can lead to severe problems if they are not dealt with at the right time. There is no reason for a pool owner to become sad when the pool is not usable, as there are experts who can help them overcome the situation. Do not let small details ruin your summer splashes and contact the staff of Pro Pool & Spa Ltd. to use reliable pool repair services in Waterloo.

5 Ways To Ensure Hot Tub Maintenance in Waterloo

Owning your own hot tub is a dream of many, and a great investment. It provides a place to relax and to entertain family and friends, while being able to enjoy each other’s company. However, like most of other best things in life, there is always some work involved. The thought of having to regularly maintain a hot tub, often scare many. This is where hot tub maintenance in Waterloo comes in. Understanding how to best maintain your hot tub means that it will stay in good condition for years to come and remain healthy while you use it. Learning a few basic steps for hot tub care and contacting a professional for concerns beyond your level of knowledge will guarantee a good time.

1) To keep your hot tub safe and clean, check the chlorine levels regularly. This measure also applies if you use another sanitizing solution such as Bromine. Hot tubs, however therapeutic and relaxing, do pose some serious health hazards if infected with bacteria and fungi. Hot tub maintenance in Waterloo make use of sell test kits, which you can acquire and use them to check and tune the levels of disinfectants. A bromine dispenser allows you to dispense the right amount of bromine into your hot tub for sanitation.

2) Changing the water as needed is another cheap yet powerful measure. This practice varies depending on how often your tub is used. Professional suggests changing the water after every three months on average to minimize any chance of the hot tub becoming a breeding ground of harmful micro-organisms responsible for Recreational Water Illnesses (RWIs).

3) Maintaining your hot tub filter clean is a crucial method to help in keeping the water clear, clean and safe. Again, depending on how often your hot tub is used, your hot tub filter should be thoroughly cleaned on average once a month to get rid of trappings which include hair, dirt, leaves etc. Mineral residue from the hot tub’s water may start coating the inside of the jets and reduce its pressure. You can use a special quick filter rinse cleaning agent to keep your filter in good form and looking brand-new for up to one year. Experts from hot tub maintenance in Waterloo suggest replacing the filter yearly to maintain high efficiency.

4) Purchase high quality chemicals to keep your water clear and clean. Chemicals such as scum and spa bright help in maintaining the water crystal clear by removing excess foam from the surface and can be used on weekly basis. Avoiding use of bargain chemicals is a wise thing since they are not only meant for your hot tub but also for your own body and you want the very best.

5) Invest in a quality cover to protect your water from becoming dirtied. Hot tub covers also help in keeping the heat inside thus saving money. Finding a cover that is made particularly for your hot tub and adopting the use of energy saving heating mode such as economy mode will save on your electric bill.

These New Home Pools in Waterloo Will Inspire You

When you want to install a new spa for your home, as a home owner, you not only want the finest new home pools in Waterloo, you want Pro Pool & Spa to install it once you decide on the ideal spa for your home. It does not matter if you want a spa that can seat 4, or 20 people, there are so many options available to you today; and, when you purchase the new home pool, you have to be sure it is properly installed in the home as well.

Professional Installers For Home Pools in Waterloo

When having the home pool installed, home owners have to work with professional installation companies. You have to find the company that has experience, and has been in the industry of installation work for many years. This is not only a guarantee that they can install any new home pool you purchase, it is also an indicator that they have the most highly trained staff and personnel, to come to your home, and properly install the new system wherever you want it to be installed.

Professional Grade Equipment  For Home Pools in Waterloo

From the pumps required to keep the spa functioning, to the equipment required to install it outside at the home, you have to make sure the installation company that you hire, is in the business. If possible, you should hire a company that specializes in hot tub installation, and has experience in this type of work. It will result in them being able to install any new home pool, and it will also result in them being able to complete the job in a shorter time than other installation companies.

Location and Professional Installation For Home Pools in Waterloo

In some instances, the home pool can’t be installed in certain areas of the home. If there is a problem running the pump, or other required pieces for the pool to work, an installation tech has to be aware of these issues. For this reason, the home owner has to hire the company that specializes in installation, to ensure the techs that come to the home, know everything about the installation process. You want to not only enjoy the new home pool, you also want to know that it is safe for you, family, and friends to enjoy as well. So, you have to hire the installation company that employs the most knowledgeable techs, to come to your home, and determine the best spot for installation of the new home pool you purchase.

With several companies to purchase the home pool from, and with several installation techs to choose from, home owners have to learn as much as possible, prior to deciding on the ones they are going to hire. When you take the time to find the best installation techs to come to your home, not only will they properly install the new home pools in Waterloo, they will also guarantee the services that they do, and guarantee the functionality of the home pool, once it is installed anywhere you choose at your home.

7 Easy Steps for Hot Tub Installation in Waterloo

A home spa is the ultimate touch of comfort and luxury to any household. Just imagine coming back from work to relax in your own personal hot tub. Take a first step in building your home spa with a hot tub installation in Waterloo. In this article we tell you how to get your hot tub installed step-by-step:

Step-by-Step Hot Tub Installation in Waterloo

1. Decide on the type of home spa you want

 
The first step in installing your hot tub at home is to think about the type of home spa you would like to have.

Here are some questions to get you started:

• Do you want an indoor or outdoor spa?
• Do you want a specific place in the home for the spa, or will it be part of your bathroom?
• What kind of temperature do you need for your hot tub?
• This is especially relevant if you want your hot tub to be outside, as it is important to consider if the environment is warm enough
• Will you be able to use it in winter?

Once you thought about these questions, you are ready to move on to step 2.

2. Ensure you have space in the home
The average home hot tub is between 6′ to 8′, but you can get customized sizes. Therefore, as a hot tub is not any ordinary addition to the house, it is important to first ensure you have space. Step 1 helped you to decide where you want to place the hot tub, so now you can take some measurements and see how it all fits in.

3. Find a hot tub that you like
There are hot tubs in different sizes, shapes and colours, for you to choose whichever best fits your taste. Some of the most spacious hot tubs are the square and circular ones, but if you need to fit it in a corner, you may want to consider a triangular shape. You can also choose the design of your hot tub and any additional features such as lightening, music and covers.

4. Buy and install your hot tub
Now that you are all set, you are ready to buy your hot tub and install it. You can get it delivered at home and installed by a professional, to avoid any errors in the set-up process and future problems with your product. The hot tub installation in Waterloo usually follows these steps:

• Preparing the location and foundation of the hot tub
• Positioning the hot tub on its foundation
• Assembling the hot tub and connecting it to the electrical supply
• Preparing the hot tub for use

With professional help, this process is straight forward.

5. Learn how to operate the hot tub

• It is very important that you understand how to operate the hot tub safely and efficiently. Here are a few points to consider:
  How to clean the hot tub
• What to do in case of electrical failure
• How to operate any additional features the hot tub has (lightening, music, etc.)

6. Be prepared where to go in case you need repair services

Now that you have your hot tube ready, avoid any future headache by finding out what to do in case something goes wrong. Whether you have warranty or you need to look for repair services in Waterloo, do ensure that when something goes wrong, you know exactly what to do.
7. Enjoy your hot tub!
Your hot tub installation in Waterloo is now complete and you are ready to sit back, relax, and enjoy a bubbly experience. Change into your favourite swim wear, comfy slippers and a gown, and enjoy an indulging experience in your home spa.

Swimming pools have become very popular amongst home-owners, for two main reasons: first of all, they increase your comfort and allow you to enjoy the hot summer days, and second of all they can significantly increase the overall value of your home. As comfortable as they may be, swimming pools do require regular maintenance services, and these services are anything but cheap. If you want to keep the water algae-free, clean and safe for you and your family, then you will have to clean the pool on a regular basis.

On the other hand, pool repair services may also be required every now and then. What do you do when you notice cracks in your pool, or when you want to install a protection fence and you do not know where to start from? You contact a company that specializes in pool repair services in Waterloo, as they will do all the work for you! Hiring a professional is certainly the most inspired choice if you are on a tight schedule and you do not have the time nor the experience to handle the repair work yourself. Here are some aspects you should consider prior to deciding on one particular pool repair company in Waterloo:

1. Check The License For Your Pool Repair Services in Waterloo

Does the company in question have a license to practice in your state? Do they work only with professional pool technicians? Did the company run a thorough background check on its employees, to make sure they are clean, experienced and trustworthy? These are the basic factors you need to keep in mind. Also, make sure to ask the business owner or manager how long the company has been in business, so you can make an idea about their expertise.

2. Check the References of Your Pool Repair Services in Waterloo

Every contractor that offers pool repair services in Waterloo should provide a list of at least three to five references that you can contact and ask for recommendations. Do not feel intimidated or ashamed: after all, it is your money and you have the right to get top-notch service for it.

Ask for references and contact them via phone. Make sure to ask them everything you need to know: were they satisfied with the work, and would they use the services of that particular company in the future? Are there any hidden fees you should be aware of? Are the technicians friendly and respectful toward your time, money and home?

3. Always Read the Contract And The Fine Print of Your Pool Repair Services in Waterloo

The fine print (that small text that is usually located at the bottom of the page) is there for a reason, so make sure to read it carefully. It only takes a few minutes to thoroughly analyze the contract before you sign it: few minutes to prevent unpleasant situations. The last thing you want after you sign the contract is to realize that the price of the repair services has doubled, because you were not paying attention to all the terms and conditions.

Moreover, make sure to ask the company for free estimates and quotes: you should have an idea about the overall price of the project, so you can compare different companies that provide pool repair services in Waterloo before you make your decision.

Salt System Questions and Answers

Q. Why is sanitizing with salt better than chlorine or bromine?
A. The water is soft, pure or sparkling clean, there is little chlorine smell or irritation, no red eyes or dry skin. The discomfort of dealing with chlorine fumes, tablets, or liquid is completely eliminated. The salt doesn’t wear out or evaporate, it gets used over and over again.

Q. What are the correct readings for salt in my pool?
A. Salt readings should be between 2700 – 3200 ppm. If your reading is between these numbers DO NOT ADD SALT.

Q. How often should I shock the pool and how do I do it?
You should shock the pool with a salt system either after a party or similar event, every two (2) weeks or if the water is cloudy. Put your unit on Super Chlorinate for 12 (twelve) hours. Return the switch to the auto position the next day.
NOTE: If your reading is below 2700 ppm, refer to your owner’s manual for the appropriate amount of salt to add to bring your unit back to its proper operating range.

How Salt Sanitizers Work

Saltwater pools have soft water which makes them very soothing but they have other advantages as well: the water is sanitized with no harsh chemicals, and they are easy to maintain.

There are however, some misconceptions around saltwater pools. The facts are that chlorine is still at work and pool damage is still possible.

How Salt Sanitizers Work

While it is true that the pool owner merely adds salt to the water and saltwater is not pleasant to drink, salt does not sanitize the water. Chlorine does. In a saltwater pool an electrolytic chlorine generator (ECG)  produces chlorine by electrolysis.

Different Grades of Salt Sanitizers

Salt is rarely sold absolutely pure. The impurities can affect both the water and surfaces around the pool.

Solar salt is created by evaporating sea water. Organic contaminants are common and can make it difficult for the ECG to do its work. Inorganic  contaminants may also be present and lead to staining and scaling.

Rock salt is mined and may contain other trace minerals including sulfates, metals, and calcium. These can stain surfaces and make the water look murky.

Mechanically evaporated salt results from brine that evaporates under controlled conditions with few impurities. It is similar to table salt but without the added iodine and anti-caking ingredients. This is the best salt for saltwater pools but even so, it may contain contaminants.

Caring for Your Pool

It is still necessary to test water quality and to keep an eye on the clarity of the water.  You should

• perform weekly pH and chlorine tests
• monthly tests for alkalinity, calcium hardness, dyanuric acid, and metals.
• monthly tests for salinity

Checking Salt Levels in Pools

When water evaporates from my saltwater pool, do I loose salt?

No. Natural evaporation of water is between 2-5cm per week depending on wind and heat. Salt and Stabiliser do not evaporate.

Cartridge Filters for Swimming Pools

The water level is too high in my pool and I have a cartridge filter. How do I drain some of the water out of my pool ?

If you have a cartridge filter then water can be siphoned out with your garden or vacuum hose.

Critical Aspects of Salt Water Chlorination

What are the advantages of salt water chlorination?

Salt-water chlorination makes your pool much easier to maintain, needing much less attention than a chlorine pool.

Because the chlorinator is adding chlorine to your pool automatically, twice every day, there is much less chance of anything going wrong, avoiding costly clean up measures.

Salt-water chlorination is less than half the cost of a chlorine pool to run.

Saves time, saves money, eliminates problems!

Zodiac Chlorinator Troubleshooting

Depending on water chemistry, occasional manual electrode cleaning of the Zodiac Chlorinator may be necessary.

Note: Always turn pump off prior to installing or removing the cell. Your pump/filter system is operated under pressure and pressure must be released before you begin.

Open the air relief valve on your pool filter to release the pressure in the system. (Zodiac Chlorinator)

1. Switch off the filter pump and salt system.
2. Close necessary valves.
3. Unplug the leads from the cell terminals.
4. Undo the two barrel unions joining the cell housing to the pool filtration system and carefully remove the cell housing.
   • Lay the housing upside down on a flat surface with the inlet ports on top.
5. Mix cleaning solution in a suitable plastic vessel by adding one part of hydrochloric (muriatic) acid to ten parts water.
   • To avoid splash, always ADD MURIATIC ACID TO WATER rather than water to muriatic acid.
   • Solutions stronger that 1:10 will damage cell and void warranty.
6. Pour the cleaning mixture into the upturned cell housing until the electrodes are completely covered.
7. Allow the cleaning solution to dissolve the calcium deposits for approximately 5 minutes.
8. When the electrodes are clean, pour the cleaning solution and the calcium residue out of the cell housing into a bucket of water.
   • The cleaning solution containing muriatic acid must be disposed of according to federal, provincial or local regulations.

FOR THE COMPLETE MANUAL GO TO Zodiac Pool Systems (Zodiac Chlorinator)

Cleaning a Hayward Aquarite Chlorine Generator

How do I clean my chlorine generator cell ? It is a Hayward Aquarite Chlorine Generator.

To service and clean the Aqua Rite Cell:

1. Turn off power to the Aqua Rite before removing the electrolytic cell.
2. Remove the electrolytic cell
3. Once removed, look inside the cell and inspect for scale formation (light colored crusty or flaky deposits) on the plates and for any debris which has passed through the filter and caught on the plates. If no deposits are visible, reinstall.
4. If deposits are seen, use a high pressure garden hose and try to flush the scale off.
5. If this is not successful, use a plastic or wood tool (do not use metal as this will scratch the coating off the plates) and scrape deposits off of plates.

Note that a buildup on the cell indicates that there is an unusually high calcium level in the pool (old pool water is usually the cause). If this is not corrected, you may to have to periodically clean the cell. The simplest way to avoid this is to bring the pool chemistry to the recommended levels as specified.

Mild Acid Washing – (Aquarite Chlorine Generator) 

Use only in severe cases where flushing and scraping will not remove the majority of deposits.

1. To acid wash, turn off power to Aqua Rite.
2. Remove cell from piping.
3. In a clean plastic container, mix a 4:1 solution of water to muriatic acid (one gallon of water to one quart of muriatic acid).
   • ALWAYS ADD ACID TO WATER – NEVER ADD WATER TO ACID.
   • Be sure to wear rubber gloves and appropriate eye protection.
   • The level of the solution in the container should just reach the top of the cell so that the wire harness compartment is NOT submerged.
   • It may be helpful to coil the wiring before immersing the cell.
4. The cell should soak for a few minutes and then rinse with a high pressure garden hose.
5. If any deposits are still visible, repeat soaking and rinsing.
6. Replace cell and inspect again periodically.

FOR THE COMPLETE MANUAL ON HAYWARD AQUARITE VISIT www.goldlinecontrols.com and got to “manuals”.

Chlorine Generator Red Flashing Lights

There are red flashing lights on my chlorine generator saying “check cell.” What should I do?

Check the salt reading on your unit and verify that your salt level is between 2700ppm and 3200ppm. If you are too low you will have to add salt, if you are too high the only way to reduce this reading is by draining some of the pool water and adding fresh water.

I suddenly have strange readings on my Aqua Rite Chlorine Generator ?

This occurs when you have accidentally switched your unit from the Fahrenheit mode to Celsius mode so the readings will be different.

To switch your unit back to the Fahrenheit mode do the following:

1. Hit the black diagnostic button until you have a temperature reading.
2. Then flip the button up to the ‘Super Chlorinate” position and straight back down to ‘Auto’.

This will put you back into Fahrenheit mode.

How do I remove and reinstall my cartridge filters?

1. Turn the pump off
2. Open the bleed valve on top of the filter (you’ll hear the water rush out of it)
3. Take the band off
4. Take the top off
5. Pull the filters out for cleaning or replacing

To re-install, the steps are exactly the same but in reverse:

1. Leave the bleed valve in ‘open’ position
2. Insert cartridge
3. Put top on
4. Put band on
5. Turn the pump on – when the water starts squirting out the top then shut the bleed valve off

Surprisingly Fast Pool Heating Mechanisms You Must Know

There’s no point owning a pool if it’s too cold to use. Adding heating extends the use of your pool to late spring and into the fall months and it is essential for indoor pools used year round.  The extra warmth makes the pool throughout the seasons and is preferred if you have toddlers using the pool as well.

There are now many methods available to heat a pool. Some standard options are

• gas
• heat pumps
• solar

Gas Heaters and Pool Heating

Gas heaters use either natural gas or propane to generate heat. An electronic ignition system and fan-assisted combustion create a high-efficiency heater that warms the water as it circulates past the furnace. The system is usually takes advantage of the same service used to heat your home.

Most gas heaters work like a giant kettle. Water passes through a heat exchanger that sits above a gas burner. The system is fast and can usually raise the temperature of the water about 1 degree Fahrenheit every hour.

Simple models use a pilot light that is lit at the beginning of the season but newer energy efficient models may feature a heat sensor that responds to a dip in water temperature  by igniting the burner. The heater is only on when it is needed.  Look for a heater with a rating of 82% or higher efficiency.

Gas heaters must be installed by a professional following government guidelines. The size (taring in BTU) is based on the size of the pool. Bigger pools need more powerful systems.

Locate the furnace someplace where it is accessible and with good air circulation, away from anything combustible and make sure you know where the shut-off valve is and how to restart the furnace should it falter.

Heat Pumps and Pool Heating

Heat pumps transfer heat from the air to the water. They slowly raise the temperature of the water significantly and cheaply. They work best in environments that are warm and humid. Some have digital thermostats included.

Heat pumps operate by using electricity to power a compressor and refrigerant system rather like an air conditioner.  The amount of heat generated is measured as a Co-efficiency of Performance (COP)

Electric and Pool Heating

Electric heaters are relatively inexpensive and are low emission choices. They are also able to run at different temperatures but they put a high demand on the household’s electrical capacity. Your electrical panel may need to be upgraded before this is an option.

Geothermal Pool Heating

A relatively new option is geothermal. This provides an efficient year-round option drawing heat from deep down in the earth and transferring it to the water through heat ex-changers.

Solar Pool Heating

Solar panels have dropped considerably in price and improved in their capacity to supply heat year round. Generally they consist of panels attached to a roof or wall.

Another solar option uses tubes to circulate water into the sunlight.

When the Pump Start is Failing You Should Know This

Q. My pool pump start is failing and it’s humming and won’t start. What now?

A. This usually indicates a problem with the motor of something jamming the impeller. With the power off, remove the pump basket, reach into the opening towards the back of the pump and feel for debris. Remove if any. If the problem persists, call your pool technician.

Gurgling Sound in Swimming Pool ?

My pool is making a gurgling sound, what is wrong?

The water level is too low.  It should be at least half way up the skimmer box opening, with about a 2 cm (1″) gap at the top.

Don’t forget to bleed the air out of the filter!

Resolving Critical Issues With Your Pool Pump Leaking Water

There is water leaking from under my pump motor. What is wrong?

The mechanical seal needs replacing. It is important to have this simple repair done as soon as possible, or further more expensive damage will be done.

A Squealing Whining Pool Pump

My pump is squealing and or whining ?

This is usually an indication that the bearings are worn out and need to be replaced. Turn the pump off.

Either remove the pump and take it to a small engine / motor repair shop or contact a pool company to have it serviced.

How do I keep my water clear in the meantime ?

It is always a good idea to have a quality brand of chlorine pucks on hand no matter what type of sanitizing system you use. In the event of pump failure or chlorine generator failure we recommend that you do either or both of the following:

1. Put some chlorine pucks in the skimmer basket
2. Put some chlorine pucks in a floating feeder in the pool water

Affordable Pool Repair Services in Waterloo

It can be very important to use only reliable pool repair services in Waterloo and one of the best companies to deal with is Pro Pool & Spa Ltd. If you are a property owner and you have a nice pool on your property, you surely know that pools require a repairs and maintenance from time to time. The reason for which you have installed a pool is that you surely want to have fun with your friends and family, but also to relax after a hard day at work.

Usually, people look for information about pool repair services in Waterloo by asking friends, neighbors, relatives, co-workers, or by searching online. These sources are all good, but people should also verify if the company they found has experience, it is licensed and can provide reliable services. Pro Pool & Spa Ltd. meets all these conditions and even more. Beside repairs, you can also benefit from services of pool design, installation, maintenance and others.

Many pool owners may not be aware of the fact that swimming in a pool can be almost as dangerous as swimming in an ocean, sea or river if the pool is not in a good condition. For this reason, it is important for a company to have the right permits, staff and equipment. In order to have a summer without worries and swim everyday with your family and friends, you must keep your pool in the best condition.

The first thing to do this is to check the water clarity regularly. If you notice that the water is not crystal clear anymore, then your pool may require cleaning.

If you do not want to be exposed to different types of microbes and get rashes or diseases, you should clean your pool regularly. If cleaning doesn’t help, then something may be damaged in the pool and you may have to use pool repair services in Waterloo like the ones provided by Pro Pool & Spa Ltd. The filtration system should always be kept in the best condition, as this can prevent future problems.

Pools can resist to wear and tear for prolonged periods of time. If you see that the color and the clarity of the water are not as they should be, the best thing to do is to let professionals from the company to fix the filtration system, as it is surely the problem.

Other things that can cause problems are the tiles and the deck lights. For example, the tiles can be cracked from time to time (usually every season). If you let professionals fix the cracks when they are smaller, you can avoid later complications.

Details like this one may seem insignificant, but they can lead to severe problems if they are not dealt with at the right time. There is no reason for a pool owner to become sad when the pool is not usable, as there are experts who can help them overcome the situation. Do not let small details ruin your summer splashes and contact the staff of Pro Pool & Spa Ltd. to use reliable pool repair services in Waterloo.

The Most Absolute Bucket Test for Leaks

The following information comes from “Canadian Leak Detection”

Use the following steps to determine if your pool is leaking

1. Bring the pool water to normal level. Fill a 5-gallon bucket with pool water to about five inches from the top.
2. Place the bucket on the first or second step of the pool. Ensure the bucket is immersed in the pool at least 5 inches.
3. Mark the water level inside the bucket.
4. Shut off the pump and mark pool water level on the outside of the bucket.
5. Resume normal pool pump operation.
6. After 24 hours, compare the two water levels. If the pool water (outside the mark) goes down more than the bucket’s water level, there is probably a leak. If levels are the same, only evaporation has occurred.

In case of rain, repeat the bucket test. During a summer day, expect water loss from normal evaporation. Test is invalid after 24 hours.

Typical evaporation

A quarter inch of water loss per day is most likely evaporation. The evaporation rate in your area will depend on humidity, sunlight intensity, barometric pressure, wind and the level of activity in the pool or spa.

After the bucket test is completed, use the pool leak calculator to determine how many gallons you’re losing in a 24-hour period, an hour, and even per minute.

Do You Sustain Pool Balance With Vital Equilibrium of Chemicals?

Maintaining the chemical balance of the water is probably the single most important part of keeping a healthy pool. Unbalanced pool water will wear down your equipment, solar blanket and pool cover.

To maintain proper water balance, you will need to test for the following:

• Total alkalinity / pH balance
• Calcium hardness
• Sanitizer

Importance of Pool Balance is Directly Related to the pH Balance

pH is a measure of how acidic a solution is.  It is measured on a scale from acidic (1)  to the basic or alkaline (14). The pH level of pool water varies widely from 6.8 to 8.4, but the water feels most comfortable against the skin in the 7.4 to 7.6 range. ( The human eye has a pH of 7.5 ).

Generally if the pH is less then 7 it is considered corrosive. Above 8 it is too alkaline and likely to cause scaling.

Salt systems don’t preclude the need to test pH so continue to test even if you have one of these systems in place.

You can test the level of pH by one of 2 methods using :

• a pH volt meter, or
• an organic mildly acidic dye such as phenol red.

The results of a pH meter are straightforward. They are a measure of voltage generated between two electrodes.

Analyzing phenol red strips is more difficult. The dye changes colour depending on whether the water is more or less acidic.  It turns orange and then yellow as the level of acidity goes up. The strip is then compared to a graduated scale that shows what pH level each colour represents. However it is possible to misread the colours depending on lighting. For the best results, you should make your comparison in bright natural light.

You should also be aware that at the extremes, the colours stop changing. So if the pH level of the pool water is lower than 6.8 it will register the same as a pH of 6.8.

Finally, chlorine can make the phenol red dye turn purple, so if the chemical balance of the pool is off, the pH test results may be impossible to read.

• Note: If the pH is too low, the sanitizer in your water will dissipate quickly.

Total Alkalinity is Directly linked with your Pool Balance

Total alkalinity (TA) measures the resistance of pH to change. Its a good indicator of how corrosive the water is. Getting the balance wrong can lead to increased deposits of scale.

You can test the TA with a titration of sulfuric acid and an acid-base indicator such as bromocresol green and methyl red. When the indicator is added to a water sample, the water normally turns green. As the sulfuric acid titrant is added, the pH level drops (becomes more acidic) and the water turns red.

Chlorine in the water can bleach out the methyl red, leaving only the bromocresol green and causing a false reading. In that case, the bromocresol green should turn blue and shift to yellow as the sulfuric acid is added.

Cyanuric acid in the water can also falsify the reading, making the water appear too alkaline.

Adjusting pH and TA to Ensure Pool Balance

You can raise the level of your pH and the TA by adding a pH increaser (TA plus) such as sodium carbonate

Lower the levels with a pH decreaser (TA minus) such as sodium bisulfate.

• Note: If your TA level is  very high, you may need to use muriatic acid to lower it. Caution should be used as this chemical is very dangerous and can damage pool liners, metal and plaster.

Calcium Hardness Affects Your Pool Balance

Water contains calcium. When calcium levels are low, water draws calcium from its environment leading to corrosion of metal surfaces and pitting of concrete walls. When calcium levels are high, the calcium precipitates out, leaving hard deposits of calcium carbonate or scaling. Either way, the effect can be extensive damage.

The proper amount of calcium varies from  175 to 400 ppm.

The test for calcium hardness begins by adding sodium hydroxide to a water sample. This counters the effect of magnesium in the water which can also make it hard. An organic dye is then added to turn the water red. EDTA is then added, binding with the calcium and turning the sample blue. The amount of EDTA added indicates the water’s hardness.

To decrease the level of calcium hardness, in many cases you only need to add water. However, if your water is very hard, you may need to consult a pool professional.

To increase the calcium hardness, add calcium chloride, following the instructions on the label carefully!

Sanitizer

Sanitizers kill bacteria. The most common are chlorine and bromine with chlorine being most widely used. Chlorine comes in granular, liquid or tablet forms.

Ideally sanitizers are used at 1 to 3 parts per million or milligrams per litre (mg/l).

Q&A

Q. How often should I test my water?
A. Unless you are correcting a water problem, once a week is a good practice.

How to Understand Your Water Levels in Your Pool

Q. I think I’m losing water. My Water levels are dropping

A. First put a mark on the side of the skimmer faceplate with pencil or tape. Monitor this mark for a 24-hour period. If water drops by more than an inch, shut the system down for a 12 hour period and monitor to see if water drops faster with the pump on or off. If water drops faster with the system on, the probability of an underground plumbing leak is good. If water drops at the same rate with the system on or off, the probability of a liner leak exists.
Note: High wind areas, non-use of a solar blanket and backwashing are all things to consider.

4 Types of Algae Living in Your Pool That Should Be Removed

When it comes to swimming pools, algae can be a common problem that becomes a pool owner’s nightmare. In order to prevent or treat algae successfully, one must understand the different types and characteristics of algae to be treated.

Algae are microscopic aquatic plant-like organisms. They do not have the same structure as higher plants. There are no roots, stems or leaves. However, like other plants they require  nutrients to grow and utilize sunlight to carry out photosynthesis. In swimming pools, algae can be quite a nuisance; however, they are actually the most important photosynthesizing organisms on earth. They capture more of the sun’s energy and produce more oxygen than all other plants combined. In addition, many species of animals depend on algae as a food source.

Algae vary greatly in size and they grow in many different habitats. They can endure a wide range of temperature and have been found growing everywhere from hot springs to deep within our polar ice.

Several types of algae can be found in swimming pools:

Green Algae Removal

Green algae is the most common with over 7,000 different species. Green algae are bright green due to the chlorophyll (the molecule that captures light energy to carry out photosynthesis) in their cells.  Green algae can be free-floating or surface-clinging and can be found in all types of pools. They are typically the easiest to treat, however, some species may be more difficult to manage than others.

Mustard Algae Removal

Mustard algae have been described as ‘adapted green algae‘. Mustard algae also contain chlorophyll, but the green colour is masked by the presence of beta-carotene. Carotenoids (such as beta-carotene) are found in many photosynthetic organisms. These compounds are responsible for colour (like the orange colour of carrots), which is why mustard algae are yellow rather than green. Carotenoids are anti-oxidants (or reducing agents). They protect against damage caused by oxidation. Mustard algae can use these compounds as a defence mechanism to help them survive in a chlorinated environment. As carotenoids protect against oxidation, chlorine (as an oxidizer) may have little effect on algae once this defence mechanism has been activated within the cells.

Black Algae Removal

Black algae are aquatic photosynthetic bacteria called cyanobacteria. They are singlecelled, but grow in large colonies. They contain chlorophyll, but they also contain compounds called phycobilins, which mask the green colour of chlorophyll. There are two types of phycobilins: phycocyanin, a blue pigment, which gives the cyanobacteria their name, and phycoerythrin, a red pigment, which exists in red or pink algae (often found around sinks and drains). Cyanobacteria are very important organisms that assist in the growth of many types of plants. They are one of very few organisms that can convert inert atmospheric nitrogen into a form that plants can use such as ammonia or nitrate.

These bacteria can grow protected from the surrounding environment. This is due to the formation of a ‘sticky layer’ on the outside of the cell. The process of photosynthesis, carried out by the bacteria, depletes carbon dioxide in the surrounding water. The decrease in carbon dioxide concentration causes the precipitation of calcium carbonate in that area. As a result, calcium carbonate, along with any other sediment that may precipitate, becomes trapped within the sticky layer. The bacteria will then grow through and over the sediment continuing to photosynthesize and develop.

This process will continue over and over again forming more layers and making the black algae difficult to treat. Brushing is extremely important when treating black algae as the protective layer must be broken in order for the sanitizer or algaecide to come in contact with the cyanobacteria.

How Algaecides Work

Quaternary ammonium compounds (quats) are positively charged and are therefore attracted to the negative charge on the cell walls of algae. This, along with the their wetting agent properties, allows quats to enter the cell wall, causing it to break. The structure of the quat makes a difference when it comes to the effectiveness of the product. Quaternary ammonium compounds have a ‘chain’ of carbons on the molecule and these carbon chains can vary in length. Through research and testing, it has been determined that biocidal activity peaks at a carbon chain length of 14.

Polymeric quat compounds work in a similar manner to ammonium chloride quats. However, because they are much larger molecules, they usually work a little slower than ammonium chloride quats.

Copper is effective at killing algae because it disrupts enzymatic activity within the cell. If the enzymes do not function properly, the organism typically cannot survive.

Preventing Algae Growth

Ultimately, proper maintenance is the key to keeping algae growth in check. The most important consideration is the presence of sanitizer, or even better – sanitizer and algaecide. Establish a maintenance system that includes maintaining appropriate sanitizer levels, routine oxidation and application of a preventative algaecide. Remember, algae treatments will be much less effective if the pool is unable to maintain a sanitizer residual.

The physical aspect involved in pool care should also be kept in mind. Proper circulation and filtration, as well as routine cleaning and vacuuming of the pool surface are very important – particularly brushing (as mentioned previously). Once algae are exposed, the products applied for sanitization and algae prevention are able to do their job, allowing them to work more effectively.

Using products that are PMRA or EPA registered as algaecides and always following the product application directions will help ensure successful treatment and a more enjoyable pool experience for the homeowner.

Do You Sustain Pool Balance With Vital Equilibrium of Chemicals?

Maintaining the chemical balance of the water is probably the single most important part of keeping a healthy pool. Unbalanced pool water will wear down your equipment, solar blanket and pool cover.

To maintain proper water balance, you will need to test for the following:

• Total alkalinity / pH balance
• Calcium hardness
• Sanitizer

Importance of Pool Balance is Directly Related to the pH Balance

pH is a measure of how acidic a solution is.  It is measured on a scale from acidic (1)  to the basic or alkaline (14). The pH level of pool water varies widely from 6.8 to 8.4, but the water feels most comfortable against the skin in the 7.4 to 7.6 range. ( The human eye has a pH of 7.5 ).

Generally if the pH is less then 7 it is considered corrosive. Above 8 it is too alkaline and likely to cause scaling.

Salt systems don’t preclude the need to test pH so continue to test even if you have one of these systems in place.

You can test the level of pH by one of 2 methods using :

• a pH volt meter, or
• an organic mildly acidic dye such as phenol red.

The results of a pH meter are straightforward. They are a measure of voltage generated between two electrodes.

Analyzing phenol red strips is more difficult. The dye changes colour depending on whether the water is more or less acidic.  It turns orange and then yellow as the level of acidity goes up. The strip is then compared to a graduated scale that shows what pH level each colour represents. However it is possible to misread the colours depending on lighting. For the best results, you should make your comparison in bright natural light.

You should also be aware that at the extremes, the colours stop changing. So if the pH level of the pool water is lower than 6.8 it will register the same as a pH of 6.8.

Finally, chlorine can make the phenol red dye turn purple, so if the chemical balance of the pool is off, the pH test results may be impossible to read.

• Note: If the pH is too low, the sanitizer in your water will dissipate quickly.

Total Alkalinity is Directly linked with your Pool Balance

Total alkalinity (TA) measures the resistance of pH to change. Its a good indicator of how corrosive the water is. Getting the balance wrong can lead to increased deposits of scale.

You can test the TA with a titration of sulfuric acid and an acid-base indicator such as bromocresol green and methyl red. When the indicator is added to a water sample, the water normally turns green. As the sulfuric acid titrant is added, the pH level drops (becomes more acidic) and the water turns red.

Chlorine in the water can bleach out the methyl red, leaving only the bromocresol green and causing a false reading. In that case, the bromocresol green should turn blue and shift to yellow as the sulfuric acid is added.

Cyanuric acid in the water can also falsify the reading, making the water appear too alkaline.

Adjusting pH and TA to Ensure Pool Balance

You can raise the level of your pH and the TA by adding a pH increaser (TA plus) such as sodium carbonate

Lower the levels with a pH decreaser (TA minus) such as sodium bisulfate.

• Note: If your TA level is  very high, you may need to use muriatic acid to lower it. Caution should be used as this chemical is very dangerous and can damage pool liners, metal and plaster.

Calcium Hardness Affects Your Pool Balance

Water contains calcium. When calcium levels are low, water draws calcium from its environment leading to corrosion of metal surfaces and pitting of concrete walls. When calcium levels are high, the calcium precipitates out, leaving hard deposits of calcium carbonate or scaling. Either way, the effect can be extensive damage.

The proper amount of calcium varies from  175 to 400 ppm.

The test for calcium hardness begins by adding sodium hydroxide to a water sample. This counters the effect of magnesium in the water which can also make it hard. An organic dye is then added to turn the water red. EDTA is then added, binding with the calcium and turning the sample blue. The amount of EDTA added indicates the water’s hardness.

To decrease the level of calcium hardness, in many cases you only need to add water. However, if your water is very hard, you may need to consult a pool professional.

To increase the calcium hardness, add calcium chloride, following the instructions on the label carefully!

Sanitizer

Sanitizers kill bacteria. The most common are chlorine and bromine with chlorine being most widely used. Chlorine comes in granular, liquid or tablet forms.

Ideally sanitizers are used at 1 to 3 parts per million or milligrams per litre (mg/l).

Q&A

Q. How often should I test my water?
A. Unless you are correcting a water problem, once a week is a good practice.

How to Understand Your Water Levels in Your Pool

Q. I think I’m losing water. My Water levels are dropping

A. First put a mark on the side of the skimmer faceplate with pencil or tape. Monitor this mark for a 24-hour period. If water drops by more than an inch, shut the system down for a 12 hour period and monitor to see if water drops faster with the pump on or off. If water drops faster with the system on, the probability of an underground plumbing leak is good. If water drops at the same rate with the system on or off, the probability of a liner leak exists.
Note: High wind areas, non-use of a solar blanket and backwashing are all things to consider.

Kids’ Health Concerns: Sore Eyes From Pool Water

What is wrong with the pool? My kids have sore eyes?

It is possible that the ‘PH’ level is either too high or too low.  Only occasionally are sore eyes caused by the chlorine level being too high.

More often than not it is simply that the children have been swimming underwater for long periods with their eyes open. Swimming pool water is not a natural substance for the eye to be exposed to.

Child Ear Infection From Swimming

What is wrong with my pool? The Kids have earache!

Probably nothing is wrong with the pool. It is almost certainly Tropic Ear, a fungus growth caused by dampness in the ear.

A Doctor can fix it very quickly. Better still, teach your children to dry inside their ears as soon as they get out of the pool.

5 Easy Steps to Choose a Company For Home Spas In Waterloo

For you to be able to choose the best company to install your home spas, there are a number of items to consider beforehand, such as if they are able to design a pool you desire. There are many designs that you could go for like underground, above ground or on ground pools. If you happen to choose underground pools, you should do your research if the company is capable of doing good excavation work to suit the shape and depth of the pool you want.

The company you choose should have good experience in construction of pool walls that are well re-enforced with steel and well mixed concrete applied to give it strength to withstand the weight of water to be filled in the pool. Good quality cement and sand mixture is applied to give the floor and walls of the pool a smooth finish.

You could also enquire of the best material to be used in lining the pool for the best ability of water retention for long where materials commonly used for this work are vinyl and fiberglass. The company should be able to offer good quality plumbing services for purposes of periodic draining of used water and re-filling with fresh one and also cleaning the pool to keep it healthy for the users.

Tips For You To Choose The Best Company For Your Home Spas In Waterloo

• Take into consideration the rates of the services. Take cognizance of the fact that the best company to install your home spas should be able to offer you quality services at reasonable and competitive rates in the market.

Consider A Company That Has A Lot Of Experience In Carrying Out Home Spas In Waterloo Installation Services

• Before you choose a company to carry out installation of your home spas, do due diligence and be sure that they have a lot of experience to carry out these works for best results and desired results. You could enquire whether they have the requisite expertise and have qualified professionals at each stage of the installation.

Check on the quality of equipment that the company uses 

• To be sure of quality work in installation of home spas, you should carry out an audit and condition of the equipment that the company uses to do this, such as excavators and concrete mixers. This will enable you decide on the best company.

Time taken before they can arrive in your home to offer you the services

• The best company for your home spas should be one that acts fast when called in to carry out these works as you may not be having a lot of free time to supervise the construction progress so that you are satisfied at the end.

Ask around for you to hear about other people’s experience

• Ask around for people who have had an experience dealing with the company that offers home spas in Waterloo installation as this will give you a glimpse of the kind of works that have been undertaken by this company in the past.

For many years, Pro Pool And Spa has been offering the best home spa in Waterloo for many people who do need them in within the city. Through the remarkable services that we offer, we have managed to attract a huge crowd of people who often prefer our services when looking for a place to relax during their holidays.

Why should you choose Pro Pool And Home Spa in Waterloo?

The following are some of the reasons why you need to choose us:

1. Experience in the Market

We have over 30 years of experience in the leisure industry and this has given use the needed experience to ensure that whatever we offer is the best for the clients who often come and get what you need when looking for that high quality place to relax in a Home Spa in Waterloo in Canada. We have also managed to build a long-term business relationship with our clients at the same time ensuring that we do satisfy their needs in the best way possible.

2. We offer quality you can trust

The award winning pool we have as well as patio designs often perfectly blend fun, safety and style for many people. This means that people who do need us will always be there ready to get the services that we offer for them whenever they feel like enjoying something unique that we do provide. People will always be satisfied at the kind of quality that we offer whenever they are looking for them in within the entire city.

3. Features and Awards

Our pools have won several awards at the same time featured on covers of several magazines. This has given us a higher reputation in the market especially those people who may need a place to relax and enjoy themselves during their holidays. You will never be amazed at the quality that you will enjoy when you do come from us to enjoy what you need in within the market. This has made us understand that our excellence surpass the expectation of many people who need our services.

4. Custom Designed Pools

You can also check the designs of your dream pool in the backyard to enable you make that ultimate choice of what you need. Our pools offer opportunities for relaxation and exercise, and a perfect way to cool down your body on very hot summer days. This should make you add a solarium at the same time extend summer through the year in the best way possible.

5. Pool and Spa Care

We also offer pool or spa care for those people who need them in the market. We also handle repairs, retrofit older pool, maintenance & supply parts as well as administer chemicals to maintain your spa or pool in a top condition.. Through this, we have always attracted many people who need our services and this should make it a perfect place where you will enjoy yourself during summer.

In conclusion, when you have the above information on Pro Pool And Home Spa in Waterloo, you should be able to choose them since they are the best in the entire Waterloo.

Professional Home Spas in Waterloo: Providing Best Help to Make Sure that Your Home Spa is Truly a Luxurious Oasis

Home spas in Waterloo are hot trend today, replacing many closets and basements in homes strapped for space. Since then, with greater knowledge of healing and technology, people have developed much better home spa therapies. You will find various kinds of spa treatments which encompass the entire body while focusing on specific aspects like health, beauty, and even weight and nutrition. For achieving this, refurbishing the look of your home and pool through high quality and lavish design and is one of the best idea to reflect your taste, living standard and lifestyle for your home spa.

Pro Pool & Spa ensuring that you get the best spa for your home:

There are many different options when it comes to home spas in Waterloo, they can be indoor or outdoor, and they can feature whirlpools or jets. It’s also important to know how many people you would like to fit in the spa. For example, some are romantic and may just be for two people where other models can handle up to seven people. The serene relaxation, the pampering, and the luxury of the Pro Pool & Spa makes you feel like a king, even if it may be for just for a day. In generic terms, we understand home spa as a place where you can get massages and beauty treatments.

A bathroom with high quality and lavish accessories shower, bathtubs, taps and many more not only adds beauty and elegance to your home decor, but also offer users to feel energized and calm. If you also want to install eye catching and superior quality bathroom and pool accessories within your budget, you don’t have to worry. Yes, professional home spas in Waterloo do have these services but it is more than what we generally understand.

Other Amenities:

Pro Pool & Spa as the most experienced home spas in Waterloo always offer a very luxurious design and maintenance to ensure you have relaxing experience. Once the basics have been figured out regarding your in home spa, you will want to discuss any other amenities you would like. For example, some spas feature an attached bench or even stools, this makes it easy to get in and out and allows for a place to put towels. People can also hop out of the spa and rest on the bench if they feel they need a break. Some other models offer different colored lights, these are a great option for those hot tubs that will be outside as it gives off enough light to see but doesn’t ruin the ambiance of the relaxation.

In addition to lights you can also request a spa that offers fountain sprays. This creates a more aesthetic appearance and the sound of trickling water can also aid in relaxation and meditation. If your spa will be outside then you also want to ensure that there are essential safety features installed. These features include automatic shut-off as well as a strong cover that locks. It’s also important to note whether or not your zoning municipality has building code requirements related to a barrier around hot tubs.

Conclusion:

If you thought that going to a spa is a modern practice, you are quite wrong. In fact, it goes way back to the ancient. The finest home spas in Waterloo always offer you with innovative technologies include ergonomically enhanced design to enjoy relaxing moment. In addition to your desired features, be sure that your home is ready for a hot tub. This includes considering the floor, or if the tub will be outside, the outside surrounding area etc. Also make sure to look into any codes regarding your hot tub. You want to make sure that your at home spa is truly a luxurious oasis.

Recruit and Hire the Best Home Spa in Waterloo to Begin Designing Your Dream Pool and Spa

A pool and spa provide people a lot of fun, enjoyment and the chance for healthy leisure. A pool or a spa is also one of the most luxurious attractions to any residential and commercial property. Pool installation should be done by experts and professional pool builders who follows the superior procedures and maintain the structural integrity of the property.

1. Pool and Home Spa in Waterloo Installation is Done by Experts:

There is professional home spa in Waterloo that offer pool installation, construction, maintenance and repair services. People who are looking for constructing swimming pools in the backyards or in the interiors can call Pro Pool & Spa for custom designed and other pool construction. A pool and spa installation can’t be done by amateurs and therefore only experienced and qualified swimming pool installers can do the job efficiently. The most experienced home spa in Waterloo pride in the reputation for giving the beautiful pool designs and off course superior construction. The custom designed swimming pool installation is also done in the backyards and the experienced professionals will do it skillfully and resourcefully. The backyards are made into beautiful place of relaxation by installing the swimming pools in the best manner. Swimming pool construction is a procedural thing and one cannot any pat of construction process that is a part of installation process.

2. Process of Pool and Home Spa in Waterloo Construction:

A pool and spa installation company offers the wide range of provisions like constructing the pools, and also advising on the right material usage for construction. Pool construction starts with the layout stage the actual shape and size of the swimming pool is outlined and if any changes are required, it can be made before excavation. Excavation is a stage where the grass is excavated, underlying rock and soil to prepare the pool construction site. Like any construction is done using the steel and wood, the process of pool construction also uses this for foundation or a framework for the pool. For a good pool and spa design, an experienced home spa in Waterloo will reflect the owner’s taste and needs that fit the lifestyle. Gunite is also installed to give pool a structure to the pool.

3. Pool and Home Spa in Waterloo Maintenance:

Moreover, Pro Pool & Spa as the best home spa in Waterloo will take care of the landscaping. Your backyard will turn into a beautiful living space. Their design team works with the pool design team to come up with the ideal combination of waterscape and landscape. The final touch of creating the perfect atmosphere is the outdoor lighting. It can have a dramatic impact on the look and beauty of your home, and all the spaces around it. Lighting can make an average area look like a work of art. They can choose built-in or stand-alone furniture for you. They also design it, or advise you on you purchase.

Upon installing a pool and spa, you able to find some online websites that provide pool and spa parts. This gives you a lot of options when it comes to cleaning your pool, cleaning your spa, or keeping them in proper working condition. Because they carry so many different types of parts, you will be able to find exactly what you are looking for. If you are not quite sure what you are looking for, then you can browse to reliable home spa in Waterloo and many categories that they have available and it will be easy for you to locate something.

These Home Spas in Waterloo Will Impress You

New Home Spas in Waterloo are sure to impress when you rely on Pro Pool & Spa to do the work for you. In addition to a new relaxing environment in the home, you are also going to be able to impress visitors that come to your home. Whether you simply want to add lavish and luxury features to enjoy and relax, or if you are planning on selling the home, the new Home Spas in Waterloo that you install in the home is going to help to increase the resale value, and to add to the depth and finishes of the home.

Are Home Spas in Waterloo The Place to Relax?

The new Home Spas in Waterloo you choose to install are a great place to relax. Sit back and dip in the spa for several hours, enjoy a great book, or simply unwind after a long day at work. No matter what you choose to do or how long you would like to enjoy the spa, you are going to be able to do so in a soaking tub. When you hire the right pros to install this in your home, you are going to be in charge of the design work. From the shape and size, to the location, surrounding features, and more. Working with a team of highly trained professional techs will allow you to decide on the design, the features, and the overall finishes that you want, when you decide to have thew new spas installed.

Are Home Spas in Waterloo Affordable?

When installing the new Home Spas in Waterloo, hiring Pro Pool & Spa will result in a lower price. Because you are dealing with a reputable company, they are going to provide you a full written quote for all work they are going to do for you. From the written estimate for design to the installation and design features, you are going to be included in everything, and will know the pricing for everything before any of the work gets underway. When you are working with a trusted, reputable, and honest company, you can rely on the work they do, and you can also be rest assured that they are going to provide you with the best pricing and honest rates, for the work they are going to do, and the installation of the new spas you want to add to your home.

If you are getting ready to sell the home and want to add to the resale value a new spa is a great way to do this. Or, if you simply want to give yourself a treat and comfortable place to relax, consider the new home spa. NO matter what the reason is for installing it, you have to hire the right people to do the work. So, you not only want to work with a company that is fully licensed and insured, but also one that is well known, has a great reputation, and a company that will guarantee all of the work that you have hired them to perform in the home.